![]() |
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
||||
|
Hi bill11uk,
Did you need to swap them around to get an output? Or are you using the system with both the cards in place, and the monitor connected to the lower card? Also what were the symptoms 2 weeks ago? Davey
__________________
Have a suggestion regarding the Mesh Owners Club? Why not post it here? ![]() ![]() "Tip: There is no cow level" |
|
||||
|
I have left the cards as they where originally installed
Using the system with both the cards in place, and the monitor connected to the lower card What started 2 weeks ago was that the monitor would stop displaying for a while and start displaying normally at the weekend the monitor stopped display completely I tried another monitory no luck . Monitors have always been plugged into top card right hand socket looking from rear I also check the nVidia control software and it no long show options for SLI or even 2 monitories etc The bottom card seem to be the only one working and that seem in a a basice config Also this evening at start up there was a smell of overheating components ![]() |
|
||||
|
Quote:
Also how the temps of the card? |
|
||||
|
Hi bill11uk,
I'll arrange to have an engineer come out with a new pair of cards. Can I assume the contact details are same as we have on record from purchase? If not could you PM me the address and telephone number? Davey
__________________
Have a suggestion regarding the Mesh Owners Club? Why not post it here? ![]() ![]() "Tip: There is no cow level" |
|
||||
|
Sorry about that, had a really busy day yesterday.
I personally use hwmonitor, as it gives me the temps of pretty much everything in my pc and is reasonably accurate. CPUID |
![]() |
| Thread Tools | |
| Display Modes | |
|
|